Get A Quote

All In One Screw Air Compressor Manufacturer
Your One Stop All In One Screw Air Compressor Manufacturer

All In One Screw Air Compressor Manufacturer

The laser cutting all-in-one screw air compressor adopts a special host for high-pressure machines, and a special exhaust port host shell specially cast for high-pressure machines. At the same time, in order to ensure stable operation, high-pressure special bearings are selected. The special oil barrel inner alchemy structure and high-pressure oil separation specially designed for the laser high pressure machine industry can improve the initial separation effect of the oil and gas separation barrel. Advanced precision filter is adopted to ensure the purity of output gas and improve the quality of finished products. At the same time, permanent magnet frequency conversion energy saving can be as high as 50%

SLTI-7.5V Screw Air Compressor

Compressed air contains 20% oxygen, which contains water and oil. If it is not cleaned, high pressure is sprayed on the protective mirror surface of the laser cutting head, which will seriously affect the transmission of the laser beam, make the focus scattered, cause the product to be cut through, and the product will be scrapped. Ultra-high-power laser cutting machines may also burn out the laser head. SOLLANT’s high-temperature air dryer can effectively solve the influence of oil and water on the laser cutting machine.

  • The cold dryer is made of aluminum alloy, which prolongs the service life and reduces blockage.
  • The frequency converter of the magnetic variable frequency air compressor has a soft start function, and the impact force on the machine is very small when it starts.
  • Low noise, the permanent magnet variable frequency air compressor works below the rated speed in most cases, which will reduce the noise and wear of the main engine a lot.
  • Using the invincible speed regulation characteristics of the frequency converter, through the adjustment of the controller or the internal regulator, it can start smoothly and slowly
Become A Dealer

SLTI-11V Screw Air Compressor

On-site screw air compressors integrate screw air compressors, freeze dryers, precision filters, air storage tanks and other components into one. Users are easy to install, easy to use, and flexible to move. After the air is integrated into the system, the air quality is obviously optimized, which can meet the process needs of various enterprises.

  • Fewer parts and connectors, reducing the possibility of unit failure and leakage;
  • The integrated pipeline system greatly reduces the pressure loss;
  • Directly remove the dry compressed air to fully guarantee the gas quality of the end user.
  • Adopt high-performance refrigeration dryer, R134A, R410A environmentally friendly refrigerants
Become A Dealer

SLTI-15V Screw Air Compressor

If we want to improve the processing efficiency of the laser cutting machine, we must add some auxiliary gases during processing, such as air, oxygen, nitrogen and other auxiliary gases. Air is the lowest cost of all auxiliary gases and is the first choice for most customers. Therefore, in order to improve the cutting effect, a special air compressor for auxiliary equipment laser cutting is necessary

  • Adopt integrated skid-mounted design, easy to install
  • Strict dryness, efficient separator and reliable electronic blowdown valve
  • Industrial grade imported refrigeration compressor, equipped with hot gas bypass valve refrigeration system has high operation flexibility
  • Simple pipeline design, less welding points, firm support, reducing the risk of leakage
Become A Dealer

SLTI-22V Screw Air Compressor

Sollant’s laser air compressor has good oil and gas separation effect, high temperature resistance and durability. It belongs to medium and high pressure, prevents excessive water, and operates at a high temperature of 90-100 degrees. The oil filter is made of high-pressure glass fiber, which is durable and not easy to break down. The lubricating oil adopts special oil for laser air compressor

  • Quiet design, stainless steel tube to ensure no leakage
  • Save space and cost
  • Modular structure design, durable components
  • Built-in high-quality freeze dryer
  • Adopt ergonomic design, lower noise, more convenient maintenance and maintenance
Become A Dealer

All In One Screw Air Compressor Manufacturer

Contact Us Now

Develop Your All In One Screw Air Compressor Business with Sollant

The air compressor is mainly used to compress the air, and then provide high-pressure air. The gas of the cutting head of the laser cutting machine is mainly used to blow off the burrs and residues, and at the same time, the optical path system is purged and dedusted. After the compressed air discharged from the air enters the air control cabinet through the air storage tank and the dryer, it becomes a clean and dry gas through a precise processing system, which is used as cutting gas, cylinder power source and optical path positive pressure dust removal gas to improve laser cutting. The operating efficiency and service life of the machine.

Contact Us For A Quick Quote

SOLLANT focuses on creating high-efficiency, energy-saving and environmentally friendly supporting air compressors for laser cutting machines. Now it has special air compressors for laser cutting, 16 kg laser cutting air compressors, 20 kg laser cutting air compressors, permanent magnet variable frequency air compressors Special air compressors for laser cutting machines such as air compressors, two-stage permanent magnet variable frequency air compressors, etc. All products have obtained various quality certifications and have passed the test of complex working conditions on site. At the same time, in order to better adapt to the use of laser cutting machines, we have done a 12-month adaptation test for laser cutting machines of different powers. , to ensure the durability and stability of the product.

SOLLANT has always attached great importance to the quality of products, fully implements 6S management and 11 quality inspection processes in R&D, production and management, strictly monitors product quality, and maintains the safety, stability and energy-saving features of Hansmoco products. Has a complete machinery manufacturing system, well-equipped. The use of advanced technology and the highest level of domestic manufacturing technology ensures the high efficiency, reliability and technological advancement of each air compressor, making it more cost-effective than similar products.

The company has 12 R&D personnel, 23 assembly engineers, and 10 after-sales service engineers, with at least 8 years of experience in the industry, which truly lays a solid foundation for the manufacture of high-quality laser cutting air compressors. All employees have been trained and assessed to provide after-sales maintenance services for customers 24 hours a day, and the company has put the list of users and models on file, and after-sales service personnel regularly check services for users.

Professional selection guidance, excellent product quality, reasonable product prices, efficient supply cycle, perfect “pre-sale, sale, after-sale” one-stop service, SOLLANT’s attitude of excellence, and constantly achieve product innovation and breakthroughs , while continuously satisfying the use of various laser cutting machines, and at the same time bringing the convenience and shock of modern industrial automation to customers.

Send Your Enquiry